Multi-layer trinket box resin silicone moulds set, includes 3 round trinket box moulds (9.6x9.6x2.5cm); 1 cover mould; 10 plastic sticks, height around 7.2cm. Can make 3 tiers jewellery organizer at the same time.
DIY exquisite storage case for home decoration or travelling. Compact cylindrical design with lots of storage space. Can store necklaces, bracelets, rings, earrings, cabochons, keys, coins, watches, lipsticks, cosmetics and other small accessories. With cover protecting your jewellery from dust and damage.
Round resin silicone trays to make 360 degree rotating jewellery holder. Allows you easily accessing your jewellery and small items. You can also rotate it to any look you like, making it elegant and stylish desk decoration.
Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin), concrete, cement, plaster, hot glue, soap, candle, wax, gypsum, mix media and more
Transparent soft mould, you can check the buttom when process project. Easy to demould, gloss finish. Flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit. Wash and boil before use, especially for food
Dimension approximate:
Trinket box moulds_9.6x9.6x2.5cm / 3.78x3.78x0.9inch
Lid mould_9.6x0.5cm / 3.78x3.78x0.19inch
Bearings_
7.2cm / 2.83inch (make 3 layers trinket box)
9.6cm / 3.78inch (make 4 layers trinket box)
1.2cm / 4.72inch (make 5 layers trinket box)
1.4cm / 5.7inch (make 6 layers trinket box)
Mould color: transparent
Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)
More Tips to use with Epoxy Resin:
1) Poured in silicone moulds in layers, allowing air bubbles completely escape;
2) To expedite the process of escaping of bubbles and time of solidification of resin, the mould can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mould, filled with resin in the oven.
3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.
4) Do not use water-base ink for resin casting.
5) After baking clay / resin in complex or deep moulds release the finished product under running water with soap.
6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.
EAN: 8381314735676
Model number: wd-3300 3304=3 3305
